Education in Motion / Blog / August 2021 / Creating a Postural Management Plan to Support a Neutral Pelvis

Creating a Postural Management Plan to Support a Neutral Pelvis

For many therapists, it is incredibly frustrating when, after providing a productive therapy session, we set up a child with non-typical development in "optimal" seated posture only to find shortly after that the child looks nothing like how they were first positioned. We slowly notice that the pelvis begins to posterior tilt, the child slides forward in their seat, the trunk starts to round out (causing thoracic kyphosis), the cervical spine is hyperextended, and the chin pokes forward. Eventually, the child's caregiver or teacher brings the child back to therapy and asks us, the therapists, to "fix" the seating system.

We reassess and realize that although all the measurements and angles are accurate, we have been unable to control the pelvis – the culprit of this poor positioning. As we presented in our blog, The Role of the Pelvis in a Postural Management Plan, the pelvis is the foundation of good positioning. We know that the head and the trunk will also come out of alignment when it is not in a neutral position. Therefore, it is crucial to maintain the neutral position of the pelvis.

What are some solutions for maintaining a neutral pelvis?

Ensure that all measurements are accurate

If a seat depth is too long or too short, it can cause the pelvis to move posteriorly. If the seat width is too narrow, we may see that the pelvis starts to rotate to fit in. If the seat width is too wide, the pelvis may have too much room and begin to skew to find a stable point, leading to an obliquity.

Provide adequate support to the pelvis on all sides

Posterior, lateral, anterior, and distal. It is vital to have a level seating surface that is firm, yet allows the pelvis to be enveloped into the seat. It is also essential to have a firm posterior surface to prevent the pelvis from tilting posteriorly. Lateral hip supports can help to keep the pelvis in midline and thus prevent it from skewing to one side, creating an obliquity, and an anterior pelvic support can prevent the pelvis from rotating.

Provide postural support devices

Using a trunk support or pelvic support will help maintain the pelvis's desired position. These supports should be secure enough that they do not allow movement. However, it must be noted that periodic breaks from the position and repositioning are required for comfort and monitoring.

Ensure that all secondary postural supports are being used correctly

When a secondary support does not have the correct direction of pull or is not tight enough, it can exacerbate the position that is being corrected. Common errors include a pelvic support that is placed too high, supports that are too loose, and belts that are placed upside down or at the wrong angle.

An example of a belt that is placed too high
An example of a belt that is too tight
An example of correct and incorrect belt orientation

Provide a good base of support for the lower extremities and feet

When the feet are grounded, the pelvis can be maintained in better alignment. Use of a secondary support (sandals, ankle huggers, foot straps) can assist in maintaining lower extremity placement. If the lower extremities go into hip and knee extension, the pelvis is likely to posterior tilt and thus cause sliding.

Accommodate the pelvis if it cannot achieve neutrality

Asymmetries need to be reduced as much as possible, but the angles of the seating system should align with the non-reducible contractures. If a non-reducible asymmetry is not accommodated, then the child will look to find comfort at another body angle and will inevitably compensate to achieve that.

Some recommendations from our experts in the field include:

  • Make sure the position of the pelvis is the first thing and last thing you check during an assessment.
  • The transfer into the seat (either hoisted, sliding, or standing transfer) is the best opportunity to get pelvis positioning optimized.
  • Educating the educational and care staff about not just how to position the supports, but why they are there, will reap the rewards in the long-term.
  • Use tilt when possible to get the pelvis into a neutral position and back into the seating system.
  • Utilize a "Seating Passport" to provide clear instructions on how and why the child needs to be positioned according to plan.

As with all postural plans, it is important to perform an extensive mat assessment before recommending a position for the child. This will help determine the plan's goals, alternative positions, frequency of positioning, and expected outcome.


Linda Bollinger

Linda Bollinger, PT, DPT, ATP/SMS
Pediatric Sales Specialist
Sunrise Medical
usLeckeyTeam@sunmed.com


Published: 8/30/2021


Comments

DISCLAIMER: FOR PROFESSIONAL USE ONLY. THIS WEBSITE (AND THE DOCUMENTS REFERENCED HEREIN) DO NOT PROVIDE MEDICAL ADVICE. Sunrise Medical (US) LLC (“Sunrise”) does not provide clinician services. The information contained on this website (and the documents referenced herein), including, but not limited to, the text, graphics, images, and descriptions, are for informational purposes only and should be utilized as a general resource for clinicians and suppliers to then use clinical reasoning skills to determine optimal seating and mobility solutions for individual patients. No material on this website (or any document referenced herein) is intended to be used as (or a substitute for) professional medical advice, diagnosis or treatment. Never disregard your professional medical training when providing medical advice or treatment because of something you have read on this website (or any document referenced herein). Clinicians should review this (and any other materials) carefully and confirm information contained herein with other sources. Reliance on this website (and the information contained herein) is solely at your own risk.