Please call 1-800-333-4000 to order this product


Frequently Asked Questions

If the chair has an R-NET control system, it is possible to increase the actuator Up Current Limit. On the PC programming software, go to Seating > Intelligent Seating Module > Channels > Up Current Limit. Under 'Channel 3', change the up current limit from 5 amps to 5.5 amps. If the chair has VR2 controls, the "Actuator 1 End Force" can be modified, however this one only goes up to 5 amps.

Please visit for this information.

The lower leg length range is 360 - 530 mm (14.17" - 20.87").

Please contact tech support to inspect and confirm that your suspension was set up correctly for your seat depth and configuration.